Rossi Model 88 Gunsmith Question
I just purchased a Rossi Model 88. The piece malfunctions as follows. Muzzle down, the trigger will turn the cylinder in both double and single action. Muzzle up, the cylinder will not turn in either mode. I believe the problem has to do with the "hand" not turning the cylinder. Is there a spring that keeps pressure on the hand, or does it float inside the frame? Does it protrude at all times, or just during cocking? Any other ideas or suggestions?
Thanks.
Bruce
Thanks.
Bruce
0
-
If your gun was imported by Taurus, I'd send it to them.
Otherwise, the only gunsmith who has Rossi parts is:
M&M Gunsmithing
204 S. Union St
Alexandria, VA 22314
703-739-2150
mail@mmgunsmithing.com
I'd give him a call; if he can't help you over the phone, I'm sure he'd be glad to fix it for you.
Neal0 -
It's an older model, imported by Interarms. Parts availability is not a problem. Numrich has them available. I am just not sure if anything is broken or not. It was so hard to cycle that I decided to clean it first. I took it apart and it was pretty gunked up. When I put it back together I noticed the cylinder malfunction. I do not remember it being a problem before disassembly, but I didn't work the action much. When I did, it seemed okay. So, I just want to be sure I'm not overlooking anything. 0 -
Yes the hand is spring loaded. I think it is in the side plate. Should be aciol spring and unger. If so make sure the plunger is behind the hand.
That' s what I remeber last time had one in my shop.
If no plunger then there is a spring on hand.
Either way it is spring loaded.
CEW0 -
Success! I had to remove the trigger to find the spring, it was inside the groove and really hard to see. Had a helluva time getting it back together, not a lot of room in there. It gave me a renewed feeling of appreciation to the folks who invented the thing.
Thanks for the help.0
Please sign in to leave a comment.
Comments
4 comments