Skip to main content
Help Center Community Shop

mauser 98

Comments

12 comments

  • w.lacoe
    Since Numrich is not selling recievers any more, does anyone know a good place to get stripped Mauser 98 recievers? I don't want YUGO's.

    Garyd
    0
  • ern98
    Hello, welcome to the forum. Well in general any given Mauser 98 in good condition that was originally issued in 8x57 can be made into a 35whelen with just a barrel change, as the original bolt face and feeding rails are compatable. But, you say you have a 9x57 chambered rifle, so I assume you have some kind of original commercial sporting rifle and not a reworked military. Pictures of just what you have would really help us give you better advice. Still, if it is an original commercial rifle I and others will probably try to convince you to leave it alone as is. You can pick up a good M98 action for as little as $100 on the auction side to build a 35whelen thus leaving a piece of history intact for the future.......
    0
  • XXCross
    Why bother. The 9 x 57 is a very good cartridge. Easy to make brass from 30-06 and bullets are available. A conversion will cost a bundle of money and you'd get little in return that you don't already have.
    0
  • w.lacoe
    It is deffinately a 9x57. I got the gun with several boxes of ammo..some round nose,some speer brand bullets, and a set of dies. The gun has ingraving and i believe its called a matt rib? with the name MatthiasWagner,Trier. Ill try to post a photo!
    0
  • Mobuck
    According to Cartridges of the World, the 9x57 uses .356 bullets and the .35 Whelen uses standard .358 bullets. The other dimensions of the 9x57 should clean up with the 35 Wh. rechamber. You might slug your barrel and find if it might be a little oversize. It's likely that .002 would not cause a problem but I'm leaving that up to you and your gunsmith.
    0
  • w.lacoe
    I can,t figure out how to upload a picture..any guess as to what a gun like this might be worth?
    0
  • MIKE WISKEY
    "I can,t figure out how to upload a picture..any guess as to what a gun like this might be worth?"..........WITHOUT PICTURES IT IS HARD TO PRICE BUT IF IN GOOD SHAPE $500 ++ (SEE ABOVE ABOUT POSTING PICTURES). THE 9X57 MM THAT I USED TO HAVE[:(] WORKED WELL WITH .358" BULLETS.
    0
  • nononsense
    w.lacoe,

    This is the link to a 'Sticky' at the top of this forum titled "Posting Photographs". The directions are simple but if you run into a problem, post or e-mail me and I try to answer your questions.

    http://forums.gunbroker.com/topic.asp?TOPIC_ID=259294

    Without quality photographs it's basically an uninformed opinion about the value and as to whether or not to perform the conversion.

    Best.
    0
  • jcc7x7
    If your rifle is one of those neat german made rifles with the rib etc. your value will be deminished with any major changes to it. i.e. rebarrel or rebore.
    I did that to one and have regretted it ever since.
    BUT
    I think rebarrelling is the best choice. You may be able to find a smith that can reset the rib on the new barrel etc.

    Might be cheaper to buy a different 35 whelen, and keep the neat old rifle like it is. Several M 98 selling on GB at very reasonable prices.
    Enjoy your unique rifle!!!
    0
  • jcc7x7
    You can get brass by necking up 8mm brass that is available new from rem and win. Seems like it would be simialr to a 358 win. which is about a 100-150 slower than the whelen.
    Unless you're going to shoot the 250 wieght that may not be a big difference to you.
    0
  • perry shooter
    IMHO you could sell your rifle here on Gunbroker buy a new factory ready made 35 Whelen and give yourself a NEW rifle + maybe some cash and make a Mauser Collectors day.
    0
  • Mobuck
    One of the gun parts houses was selling these earlier in the year pretty cheap due to the caliber.
    0

Please sign in to leave a comment.

Recent Activity