Skip to main content
Help Center Community Shop

A500 Browning stock damage

foo
I have an A500 with chips broken off of the stock where it meets the receiver. Looking at other a500's on the site shows that many have the same damage. Apparently a poor design. I have a brand new stock for mine but hesitant to install. What can I do to avoid the same damage occuring........a spacer or a bedding material? The area of the stock which fits inside the receiver is inletted to accomodate 2 1/4 inch pins which makes the stock very thin at that point. Any help would be appreciated, Thanks in advance
0

Comments

4 comments

Date Votes
  • MIKE WISKEY
    glass bed the new stock/receiver joint.
    0
  • Sling Works
    I also have a 500 R, the earlier one without red detailing.

    I bought mine NIB at a show a few weeks ago, and while i havn't had it long I have put quite a few shells of all types through it already, and not even 1 miss...

    I have seen several of the 500's with chipped stocks, seems to have been a real issue with that model...

    From what I can tell it's a combination of the later style (90 on?) stock coupled with magnum loads.

    I havn't seen an early 500 (88-90) with stock damage, but many of the later ones do seem to exhibit it.

    I think Mike Whiskey has the best advice, to glass bed the joint and keep your stock bolt tight as posible.

    Personally, I really like this shotgun. I also have an A5 MAG, but I like the 500 better.


    -CS
    0
  • tenwalker
    I bought my a500 when they first came out. I have put thousands of rounds thru it with no chips and no problems. I really love to shot this gun. Dale
    0
  • mrbruce
    +1 on the glas bed-- it will solve the problem.....
    0

Please sign in to leave a comment.

Recent Activity