Skip to main content
Help Center Community Shop

30.06 Ammo codes

Comments

10 comments

  • Tailgunner1954
    It's Korean

    KA: Pusan Government Arsenal, Pusan, Republic of Korea
    0
  • goodbread
    Thank you, Tailgunner
    0
  • TRAP55
    Some of the most corrosive milsurp ammo I've run across too. Clean accordingly "immediately" after shooting.
    0
  • goodbread
    Good advice to all Trap55, regardless of year, make, model and chemical reality.
    Thanks, Mike
    0
  • goodbread
    I have ammo with the following stampings:
    FA Match 59 & 60
    HXP 65, 78,79, 80
    TW 53 (yippee, API black nose!!)
    AMA 80
    RA 27
    R-P 30-06 Sprg
    REM UMC 30-06 Sprg

    I'm pretty sure the last 2 are just commercial Remington ammo

    Thanks for all the help with this post and my post about en bloc clips.

    Mike B
    0
  • Tailgunner1954
    FA Frankford Arsenal, Philadelphia, PA
    TW Twin Cities Ordnance Plant, Minneapolis, MN
    RA A/S Raufoss Ammunisjonsfabrikker, Raufoss, Norway
    RA Remington Arms Co., Bridgeport, CT
    HXP Greek Powder & Cartridge Company, Athens, Greece
    AMA Danish Government Arsenal (Ammunitionsarsenalet) Copenhagen, Denmark
    R-P Remington Arms Company, Inc., Bridgeport CT , and later: Lonoke, AR (also used by CDM of Mexico)
    REM-UMC Remington Arms Co., Bridgeport, CT (also used by CDM of Mexico and CBC of Brazil)

    As you guessed earlier, the # is the year of manfacture
    0
  • goodbread
    Excellent info, thank you
    0
  • rsnyder55
    And if you run into any LC, that would be Lake City.
    0
  • givette
    quote:Originally posted by Tailgunner1954
    FA Frankford Arsenal, Philadelphia, PA
    TW Twin Cities Ordnance Plant, Minneapolis, MN
    RA A/S Raufoss Ammunisjonsfabrikker, Raufoss, Norway
    RA Remington Arms Co., Bridgeport, CT
    HXP Greek Powder & Cartridge Company, Athens, Greece
    AMA Danish Government Arsenal (Ammunitionsarsenalet) Copenhagen, Denmark
    R-P Remington Arms Company, Inc., Bridgeport CT , and later: Lonoke, AR (also used by CDM of Mexico)
    REM-UMC Remington Arms Co., Bridgeport, CT (also used by CDM of Mexico and CBC of Brazil)

    As you guessed earlier, the # is the year of manfacture


    Goodbread: The list below shows the changeover dates and lot numbers from corrosive to non-corrosive of the US ammo on your list.

    Frankford Arsenal
    Type: .30-'06 Ball:Lot Number: 4149 Date: October 1951 First SAFE headstamp: FA 52
    Type: .30-'06 AP:Lot Number: 887 Date: October 1951 First SAFE headstamp: FA 52
    Twin Cities Ordnance Plant
    Type: .30-'06 Ball:Lot Number: 19362 Date: December 1950 First SAFE Headstamp: TW 51
    Type: .30-'06 AP:Lot Number: 19776 Date: February 1952 First SAFE Headstamp: TW 53
    Remington Arms
    Type: .30-'06 Ball:Lot Number: 33853 Date: November 1951 First SAFE Headstamp: RA 52

    ..Hope this helps a little. Best, Joe
    0
  • Hunter Mag
    I didn't want to make this post cause it's #10 and this thread will be locked but here's a very usefull source as far as 30-06 ID goes.

    http://cartridgecollectors.org/headstampcodes.htm

    Here's info on last dates for corrosive primers.
    http://www.ashlandlakegunclub.org/docs/CorrosivePrimerRedux.pdf
    0

Please sign in to leave a comment.

Recent Activity