Walther P22 Problems

AEnemaBay

October 03, 2009 21:12

I recently purchased a Walther P22 that wasn't firing in either single or double action. Well I detailed stripped the pistol, cleaned and lubed everything and now the single action works perfectly but the double action doesn't work at all. I referenced the assembly to the exploded diagram and everything is present and everything looks to be assembled correctly.

If anyone could offer up some insight into this I'd greatly appreciate it.

0

• 

  spasmcreek

  October 04, 2009 05:55

  does the hammer lift & fire when you pull the trigger..if mechanical action works correctly then see if pin strike on rim is deep enough to set off primer...be careful or use a round with the lead pulled out & powder dumped...safety first.... if mechanical action seems correct check for light strikes...compare to strikes on case on another 22 that is working

  0
• 

  BigLoop22

  October 04, 2009 09:56

  AEnemaBay,
  
  No offence to anyone on this forum, but for the P22, go to this Rimfire Central Walther forum:
  
  http://www.rimfirecentral.com/forums/forumdisplay.php?f=48
  
  Read all of the tutorial "stickys":
  
  http://www.rimfirecentral.com/forums/showthread.php?t=100700
  
  http://www.rimfirecentral.com/forums/showthread.php?t=100711
  
  http://www.rimfirecentral.com/forums/showthread.php?t=100723
  
  http://www.rimfirecentral.com/forums/showthread.php?t=272257
  
  ...then, ask your question, with your problem in the "subject" line. I hope you get this one cleared up, soon.[;)]

  0

Please sign in to leave a comment.