Skip to main content
Help Center Community Shop

Comments

6 comments

Date Votes
  • XXCross
    In the center of the reciecer just in front of the bolt face when it's at it's rearmost position, there is a small hole. (abt 1/8 in. dia.) Use a punch to depress the metal tab below this hole and slide the bolt out.
    Perry's right, I forgot about pulling the trigger at the same time.
    (it all seemed so straight forward)
    0
  • perry shooter
    Hello On mine if you open the bolt and look at the top of the magazine there is a loading ramp about 1/2 inch long behine the magazine with the bolt fully open yoy can see a hole about 1/16 inch diameter take a small allen wrench or pin and press down on this hole and slight pressure on the trigger at same time the pin will move down and then you can the slide bolt out

    EDIT

    Hello the picture of your rifle look like it is an original early model 37 I don't know when they changed the barrel crown or the trigger bolt release. You may be able to take the barreled action out of the stock and then release the bolt stop. The stock has been modified by the shooter for his use in Target shooting and is a part of history . If you knew the original shooters name you might be able to find out if he ever shot the rifle at Camp Perry. I have the names and scores of every pistol shooter from 1972-2005 the years I went but might be able to come up with a date for a rifle shooter also.
    0
  • CS8161
    I opened the bolt but can see no hole in front of the bolt face?? Is it possible that someone put a rangemaster model 37 barrel on a generic receiver??
    0
  • MIKE WISKEY
    some pix's of my 37. note: your is a very early one (pre war) and mine is post war.
    m37-1.jpg
    100_0213.jpg
    0
  • CS8161
    quote:Originally posted by MIKE WISKEY
    some pix's of my 37. note: your is a very early one (pre war) and mine is post war.
    m37-1.jpg
    100_0213.jpg


    Thanks Mike...do you know how the bolt comes out of these early ones?
    0
  • MIKE WISKEY
    NO, BUT I SUSPECT YOU WOULD HAVE TO REMOVE THE STOCK AND 'TRIP' THE LEVER FROM THE SIDE
    0

Please sign in to leave a comment.

Recent Activity