Noble sxs 12ga
Ihave a Noble sxs 12ga which was made in Spain. Having trouble disassembling. Can't remove the stock. I thing there is an internal screw in the receiver. The receiver has a floor plate with one screw. Can't remove it. Can anyone tell me how to disassemble this gun? Thanks JNJ
0
-
Have You pulled the Butt Stock to see if there was a Bolt Hole? Look and see if there is a Bolt...You might need a Flash Light to see whats at the bottom of the Well.... 0 -
What Captain Kirk meant to say is remove the butt plate from the butt stock. If there is a thru bolt holding the butt stock to the receiver you can then see the hole where it is installed. If there is a thru bolt (actually a screw) you'll need a six or eight inch screw driver to remove the screw. 0 -
Thanks guy's. No hole in the butt stock 0 -
If you can post a photo Im sure we can tell you how it comes apart. There are problably only 5 or 6 screws total. One under the release lever and the ones under the gun. Remove the trigger guard and snap some photos, or just start taking out screws. 0 -
Looked in Gun Parts catalog under Noble Guns and there are illustrations for Models 60, 60AF, 160, 65, 50, 80 and 70. Of course no mention of where they were all made but all show a through bolt (screw) holding he butt stock to the receiver. You didn't say what model you gun is. 0 -
Re Noble sxs some great pictures on http://mcb-homis.com/noble/ Any suggestions re disassembly appreciated.
JNJ0
Please sign in to leave a comment.
Comments
6 comments