auto436658
auto436658,
Please don't be to proud to reach out and grasp an extended hand. I never said that I was an authority, but just stated my experience. Have you looked back at your original thread? I stated an opinion which was neither wrong or right, and done it objectively based on my experiences. You replied with a beligerant(IMO) reply, and a firefight ensued...of which by the way I am done with.
Most people crave to have a Poly Tech Legend. Back when they were $329.00 each, and the stamped Poly Tech's were $279.00 each, and there was an impending ban in the air, I purchased a handfull or more of each in different configurations. I do have a NM that will approach 1 1/2 MOA with the right ammo. They all are more than accurate enough for their designed and intended puropses. The only ones I have had a failure in are the Poly Tech stamped, and that is because the rails were improperly hardened. I carefully removed the old ones, and replaced them using a jig/fixture that I made to hold them in place while they were welded.
I see you started adding all of the others that replied to the list of triads that are forthcoming. Are you upset with them too, or just me? I do not thing you should walk away from the forum, as you seem to have some good to offer. The advice I was giving you was so you did not get booted from the forum...I have seen it happen. I too started out like yourself, and stepped on some toes that I shouldn't have...these guys were the real experts and have devoted much of their life to the firearms industry, and research of many related venues. Again...I am speaking from experience...so please, by all means, stick around and learn some things, and be objective about learning...you will be amazed.
Lastly if you wish to e-mail me, my address is readily available in my profile. I would love to talk with you.
Best
Please don't be to proud to reach out and grasp an extended hand. I never said that I was an authority, but just stated my experience. Have you looked back at your original thread? I stated an opinion which was neither wrong or right, and done it objectively based on my experiences. You replied with a beligerant(IMO) reply, and a firefight ensued...of which by the way I am done with.
Most people crave to have a Poly Tech Legend. Back when they were $329.00 each, and the stamped Poly Tech's were $279.00 each, and there was an impending ban in the air, I purchased a handfull or more of each in different configurations. I do have a NM that will approach 1 1/2 MOA with the right ammo. They all are more than accurate enough for their designed and intended puropses. The only ones I have had a failure in are the Poly Tech stamped, and that is because the rails were improperly hardened. I carefully removed the old ones, and replaced them using a jig/fixture that I made to hold them in place while they were welded.
I see you started adding all of the others that replied to the list of triads that are forthcoming. Are you upset with them too, or just me? I do not thing you should walk away from the forum, as you seem to have some good to offer. The advice I was giving you was so you did not get booted from the forum...I have seen it happen. I too started out like yourself, and stepped on some toes that I shouldn't have...these guys were the real experts and have devoted much of their life to the firearms industry, and research of many related venues. Again...I am speaking from experience...so please, by all means, stick around and learn some things, and be objective about learning...you will be amazed.
Lastly if you wish to e-mail me, my address is readily available in my profile. I would love to talk with you.
Best
0
-
tsr1965 and auto436658,
I'm sorry I didn't catch this series from the beginning as I would have locked it from the start and let you guys work this out by e-mail.
Arguing (discussing loudly...) from logic and reason is good for the members and often brings out information and viewpoints that would otherwise be glossed over or not brought up. We all get wired up occasionally but this one got out of hand.
Name calling and insinuations are definitely against the forum Posting Guidelines. Any further continuance from any of the members will result in lock outs. Control your tempers and discuss this like gentlemen or cease altogether. If you can't type with civility switch to e-mail and leave the garbage off of the forums.
Best.0
Please sign in to leave a comment.
Comments
1 comment