Skip to main content
Help Center Community Shop

1911 question

redhead71
If you wanted a good 1911 would it be better to buy the Springfield and add the options you wanted yourself, or buy a Kimber that is already tricked out, or something else that I have not mentioned? You guys generally give good advice so that is what I am trying to get again. Thanks guys!
JC

KungFu.gif
Opinions are like azzholes, eveyone's got one, and this just happens to be mine!
0

Comments

7 comments

Date Votes
  • redhead71
    The slide on my .48acp Colt Series 70 Government Model keeps locking back during firing. I've tried replacing magazine to no success. I though it might be I'm not holding it right but that doesn't seem to the case either. Might it be the slide stop spring?
    Anyone have any ideas why this is happening?
    0
  • machine gun moran
    Pierced primers? Or split cases from a way-oversized chamber? But these things would readily show.
    0
  • perry shooter
    Hello RED With out knowing the conditions This is only a guess but at places like Camp perry when you are shooting 100 pistol shooters on the line and you are shooting a Rapid Fire String most times you are shooting in up to a 30 MPH headwind straight off of lake ERIE it sometimes feels like you are looking into a sand blaster. of burnt and unburnt powder . It does get your attention some pistol powders used by the brands you name are very GRITTY. sort of like the bugs on your teeth when riding a motorcycle [:p][:I]
    0
  • redhead71
    i was shooting in a in door range with new ammo and gun!
    0
  • beantownshootah
    Many guns will normally toss a *little* unburned powder when the action unlocks, depending on ammo and type of gun.

    This is one of several good reasons why its important to always wear safety glasses when shooting.

    Ported gun barrels or compensators can make this a lot worse, but you ought to know if you have a gun with one of these features.

    Some reloads are more prone to spitting powder, but it sounds like that's not the case here.

    Assuming your gun is chambered for the ammo you're using, there are a few things that *could* do this, including a damaged chamber or barrel.

    If you're not particularly experienced with guns, you might want to take yours to someone who is to shoot it and/or inspect it for you.

    First thing to do is look at the spent cases and see if they are bulged, cracked, or otherwise damaged. Is there a lot of carbon fouling on the outside of the case mouth?

    Check the primers too. They should have an even central dimple. If there is a hole through the primer that's your answer (pierced primer). If the primers are bulged outwards or missing, that's a sign of increased pressure. . .bad.

    Then check the chamber and barrel for defects.
    0
  • Hawk Carse
    At least two of the three are what I call "econo-ball" and the powder used to just get by on specs may not be burning evenly or fast enough to obturate the cases tight in the chamber. Have you tried it with first line or premium ammunition?
    0
  • tsr1965
    Sounds to me like your pistol is unlocking before the pressure drops off. Could be a weak recoil spring. If not, it needs to go see the doctor, and soon.

    Best
    0

Please sign in to leave a comment.

Recent Activity