Skip to main content
Help Center Community Shop

Ithaca Mod.37 Featherweight 12 Ga.

capnrm
Hi Guys,
Just purchased one of these on the Auction,received the gun and the slide opens but will not close, I know nothing about these Ithaca's can anyone help ? I will take it to the gunsmith, but i don't want to get took if you know what I mean.

Thanks
0

Comments

9 comments

Date Votes
  • capnrm
    Hi Guys !

    Having trouble locating front sling swivel for Mod 37 DeerSlayer gun produced in 1970. can anyone help ? Check all mjor distributers no luck keep send Uncle Mike's claiming to fit but doesn't.

    Thanks,
    Ron
    0
  • rong
    look for a slide release button
    0
  • Ambrose
    I got my first one of these in 1952 (I still have it along with 7 or 8 others). My newest one was made in 1982 and they have been changed some since then but I might be able to help if you can be more descriptive of the problem. I don't understand "will not close". Is the slide stuck or will not lock or???
    0
  • mrbruce
    I thought the slide release opened the bolt [:D]
    Pretty hard to tell what the problem is with out more info..
    A gunsmith is your best bet and shouldn't cost more than
    $45.00 to strip it down and give it a good deep cleaning
    and fix the problem, no matter what it is...
    They are a very well built shotgun and don't have really bad problems....
    0
  • Mossbergboogie
    I am no Ithaca guy but that sounds like a bind like the action bar or bars skiped out.
    0
  • Robin
    First remove the barrel. Just unscrew the cap on the magazine tube. The barrel should slide out of the receiver. Try working the slide. If it works you may have a barrel replacement that wasn't fitted properly. If the bolt will still not close something is bent, broken or missing.
    0
  • MIKE WISKEY
    "Just unscrew the cap on the magazine tube. The barrel should slide out of the receiver."...........actualy you have to screw the cap 'in' and then twist the barrel.
    0
  • capnrm
    HI,
    And Thanks for getting back the slide opens (pulled back to eject,but won't close.quote:Originally posted by Ambrose
    I got my first one of these in 1952 (I still have it along with 7 or 8 others). My newest one was made in 1982 and they have been changed some since then but I might be able to help if you can be more descriptive of the problem. I don't understand "will not close". Is the slide stuck or will not lock or???
    0
  • makindu
    cap, with the barrel removed, is the forend still 'stuck' in the rearward position? I'm betting on Robin's line of thought. Something got re-assembled improperly, or something is bent, or binding. If you can't figure out how to remove the barrel, you best take the gun to a 'smith. Is the shell ejector (metal two pronged fork-like part) below the bottom of the receiver when the forend gets 'stuck'? I'm just trying to get a better visual, because I really think something is jambing up inside the receiver.
    0

Please sign in to leave a comment.

Recent Activity