Skip to main content
Help Center Community Shop

Comments

4 comments

Date Votes
  • k_townman
    ."...
    0
  • fordsix
    i use 50/50 alox beeswax don't need heat
    0
  • perry shooter
    Hello IMHO the hard lube that needs a heater is just for someone that sells cast & lubed bullets There is more to bullet lube then meets the EYE A proper sized bullet about .001 larger then bore diameter and correct soft lube will keep leading to a min. Undersize bullets will lead no matter what . The lube helps to seal the bullet to keep from GAS CUTTING. Also the only bullet luber that has an advantage over ALL OTHER types is a STAR/MAGMA brand the will lube and size 100 in the time it will do ten on any other machine and they use solid stick. I have lubed and sized over 300,000 45ACP lead bullets in the last 40 years.
    0
  • perry shooter
    Hello I only lube what I am going to load that loading session I normally load 1000 45acp at a time with a star loader and star Luber. I have 2 small metal trays size 100 bullets about 2-3 minutes and place not touching on metal tray slide tray to left side of star press load primmer tube with 100 primers 1 minute check powder measure reservoir and if it is over half full. Load 100 rounds and place in plastic 50 round boxes then repeat 10 times takes about 2 Hours total to load 1000 rounds of match grade ammo. I never hardly touch the side of a bullet once it is lubed.
    0

Please sign in to leave a comment.

Recent Activity