Gun case tumbler lock set procedure ?

Jagsport

March 07, 2009 11:39

I just recieved a lockable gun case - Hurray
There are red plastic pins in the "three tumbler" combination lock holding them from the factory at "zero, zero, zero".

How do I correctly set this to my own combination ?

Of course I will not do it with anything in te case... Murphys rule applies for me.
Thank You - I have know idea who made the case but I do now the factory that the gun came from.

0

• 

  Spider7115

  March 07, 2009 12:20

  There's usually a small switch or tab on the backside of the lock. Slide the switch, set your preferred combination and then return the switch to the original position.

  0
• 

  Jagsport

  March 07, 2009 12:48

  Thank You ,,,,, I looked for that switch and there is nothing there?
  It is really a dilema to me.

  0
• 

  Spider7115

  March 07, 2009 13:14

  quote:Originally posted by Jagsport
  Thank You ,,,,, I looked for that switch and there is nothing there?
  It is really a dilema to me.
  
  
  Nothing on the edges or maybe a small button you need to push with a pin? If not, you got me but you could always ask the manufacturer. Maybe their website even shows you how to do it. Try holding the latch in the open position and then setting the tumblers.

  0
• 

  Jagsport

  March 07, 2009 13:31

  Thanks again - I think you are right.
  I have just put tape over them for now.
  I will go back to the gun shop and ask next week
  Thanks

  0

Please sign in to leave a comment.