Skip to main content
Help Center Community Shop

savage 17hmr

mstang108
Brand new will only eject spent casings half way then I have to dig them out the rest of the way. Anyone have any ideas?
0

Comments

6 comments

Date Votes
  • mstang108
    Anyone have a new single shot rolling block rifle model 30G made by Stevens Savage?Do you like it?
    0
  • gskyhawk
    dirty or rough chamber , give the gun a GOOD CLEANING and oiling
    0
  • Geri
    was the chamber and bore cleaned before firing?
    0
  • iwannausername
    What ammo? Have same gun in 22 mag, Winchester ammo does the same for me along with a lot of misfires and poor accuracy. CCI ammo has no issues and is very accurate...
    0
  • 336marlin
    I guess you mean extract instead of eject. Sounds like a problem with the bent metal extractor; needs a little tweaking. Extractor is probably not tight enough on the case rim and is allowing the case head to pull out of the recess in the bolt face as you pull back; when this happens the case pulls out far enough so the spent case can be pushed sideways by the extractor losing it's grasp. I'm sure Savage will be more than/then willing to correct this on a new gun. Watch the process as you slowly pull the bolt back to see if this is the scenario.
    0
  • mstang108
    17 hmr. thanks for the sugestions. Thanks for the ideas, just got it back from savage and they didn't fix the problem. So i just had it sent out again. The extracter is letting go like you said so hopefully it will come back correct thanks again.
    0

Please sign in to leave a comment.

Recent Activity