ever try Hornady spray case lube on bullets?

mbsams

November 25, 2010 04:58

I have a couple auto's - I've tried lots of factory loads and a number or hard cast hand loads - none feed 100% all the time, now and then a round "sticks" on the loading ramp, usually after a loaded gun has sat for awhile, and that's when you might need it. I wonder if a little dry lube on the nose of the bullet would help?

0

• 

  perry shooter

  November 25, 2010 05:12

  Make sure you get a taper crimp die for your Hand loads this will cure 95% of feed trouble crimp the case mouth about.002 smaller then the case 1/4 inch down on the cartridge. Then get some 600 grit or finer wet or dry sand paper and with no power tools polish the feed ramps on your pistol. IMHO lube on a feed ramp is a band-aid approach to a FIX.

  0

Please sign in to leave a comment.