Skip to main content
Help Center Community Shop

Remington 870

Comments

7 comments

  • kooterbill
    After I take a shot my next round 80% of the time will not load into the chamber, I have a B Square side mount for my scope, can it be that the receiver is being distorted enough to cause this malfunction??? Thanks for any suggestions.
    0
  • kooterbill
    Forgot to mention that it is a 12 ga. with a 28 inch barrell.
    Propably does't matter.
    0
  • Mossbergboogie
    If it is a B-square or other bolt on mount it is probably under it yes.
    0
  • trapguy2007
    On all 3 of mine ,it is on the side of the action.
    If it is an Express---I don't know .
    0
  • 1KYDSTR
    In the same place whether a Wingmaster or Express, rear, side of reciever, and if it has a saddle mount, indeed it will likely be covered
    0
  • Txs
    870 serials are stamped along the lower portion of the receiver's non-ejection port side.

    Optics or ammunition carriers mounted via the receiver's two trigger group pins will often cover it.
    0
  • wpage
    Next time you give it a good cleaning. You will see it. Under as described. Opportunity for rust prevention on your
    Rem...
    Have Fun!
    0

Please sign in to leave a comment.

Recent Activity