Scope reticle question-
Whats the difference, or advantage/dis-advantages to a duplex reticle vs a fine crosshair? Getting my first scope for my first long gun, .22LR.
0
-
Scope reticles depend on intended use. If your 22lr rifle is only to be used at the target range then many folks like the fine line type as the lines don't cover the bullseye so much. But, if you are likly to shoot in the field or wooded areas then the fine line often disapear in the background clutter and so the various heavier types of duplex because they stand out better. Post type, range finding, et al are types of specialty reticles that try to give a better sight picture for the given shooting situation. Because that is what it all comes down to; getting the best sight picture for the shot..... 0 -
Duplex. Variable like a 2x7 or 3x9. If you get a variable with duplex for your .22 you can actually use the duplex for drop compensation. Here is how it is done. A 22 drops a good bit so a 100 or 150yd shot requires some hold over. But how much hold over? You need something precise like the lower taper point of the duplex.
Take your rifle to a range ,sight it in at around 50yd, now shoot at something at 100yd in the dirt or where you can see bullet impact. You will notice that if you turn the power up or down at some point the duplex lower taper point will coincide with the bullet impact. Now just remember that power setting and use the lower taper point of the duplex for a shot at that range. After some experimenting you can try a different power at a different distance. Write this stuff down, or you will forget what power to set the scope on for the distance. Normally the lower power will give you a smaller image and thus more hold over. make sure you mount your scope with cross wires vertically straight down the bore butt plate line.
First scope...first gun...you lucky dog..life awaits you!0
Please sign in to leave a comment.
Comments
2 comments