Lee .44 Mag 310 Grain

buddyb

September 25, 2010 15:39

I cast a couple of hundred 44 mag 310 grain bullets from a Lee mold.Got them lubed and gas checks installed,but now I am having a hard time finding reloading data.I found one on line that is 21 grains of H-110 but that seems a pretty hot load.I am going to use these in a 5 inch Redhawk.Any suggestions? Thanks

0

• 

  Toolfogie

  September 25, 2010 16:58

  310 grain Lead SWC or RN + Gas Check (GC)
  Bullseye 6.8 gr. 975 FPS
  Unique 7.2 gr. 965
  2400 13.5 gr. 1,150
  2400 14.5 gr. 1,194
  True Blue 9.6 gr. 977 start
  True Blue 10.7 gr. 1,055 max
  Enforcer 16.5 gr. 1,171 start
  Enforcer 18.3 gr. 1,301 max
  
  http://www.reloadammo.com/44loads.htm

  0
• 

  dcs shooters

  September 26, 2010 08:00

  18.0grs. of H-110 should put you about 1250fps. 19.0-1400FPS
  I'D start about 17.0 and work up from there.
  I user 24.0gr. H-110 with a 240HP and got about 1550 out of a 7 1/2in. Redhawk.

  0

Please sign in to leave a comment.