Skip to main content
Help Center Community Shop

uzi .41 barrel

xxx97
there not sellin', been watching the same 2 being relisted month after month...can it be retooled for let's say .45?
0

Comments

5 comments

Date Votes
  • Nwcid
    I just went and measured mine and OD is the same and there is room for the chamber.

    I doubt it would be cost effective to re-do the barrel as it would take a lot of effort considering you would have to re-rifle them not just re-chamber. I know there is a company that makes Uzi barrels in other calibers and I think they run in the $150 range

    So if it is worth it would depend on how much it would cost for the barrel + labor vs a new .45 barrel.
    0
  • leeblackman
    The .41AE is a .400cal bullet. So .40sw or 10mm would be feasible if you did some modifications to a bolt, and reamed the chamber.
    0
  • Pearyw
    I have a 41AE Tanfaglio pistol and it uses a .410" bullet. I reload for it with the Sierra 170 gr 41 magnum bullet. Fortunatly, I have a 9mm barrel for it as well. I bought a case of ammo years ago when I got the pistol. Ammo and brass is hard to come by these days.
    0
  • tsr1965
    quote:Originally posted by leeblackman
    The .41AE is a .400cal bullet. So .40sw or 10mm would be feasible if you did some modifications to a bolt, and reamed the chamber.


    You sure about that? I had a Jericho 941, with both the 9mm, and 41AE barrel, and the 41 AE bullets were 0.410" diameter, the same as a 41 Magnum. The 41 AE was out long before the 10mm, and 40 S&W. The Idea was to get a 41 punch with a 9mm rim. The only habdgun that was 0.400" diameter before the 10mm, and 40S&W was the 38 WCF, or 38-40.

    I believe if you look under the bullet diameter column in this loading data, it says 0.410"



    Cartridge: 41 Action Express
    Load Type: Pistol
    Starting Loads
    Maximum Loads

    Bullet Weight (Gr.) Manufacturer Powder Bullet Diam. C.O.L. Grs. Vel. (ft/s) Pressure Grs. Vel. (ft/s) Pressure

    170 GR. SIE JHC Hodgdon HS-6 .410" 1.150" 7.2 940 8.4 1114
    170 GR. SIE JHC Hodgdon HP-38 .410" 1.150" 4.7 870 5.5 988
    180 GR. SPR HP Hodgdon HS-6 .410" 1.100" 6.9 890 7.8 1044
    180 GR. SPR HP Hodgdon HP-38 .410" 1.100" 4.4 838 5.1 951
    210 GR. HDY XTP Hodgdon HS-6 .410" 1.150" 6.1 797 6.6 904
    210 GR. HDY XTP Hodgdon HP-38 .410" 1.150" 4.1 759 4.6 839


    NEVER EXCEED MAXIMUM LOADS


    Best
    0
  • grady mitchell
    i have the 41 ae brass listed here on the gb site search under seller name shady grady
    0

Please sign in to leave a comment.

Recent Activity