.32 H&R
Does anyone have any info on a .32 cal H&R topbreak revolver serial numbe is available. The 1st 3 are 138.
Any info is greatly appreciated. Thanks in advance
Rick
Any info is greatly appreciated. Thanks in advance
Rick
0
-
H & R was in business for over 100 years. They probably made hundreds of thousands of .32 revolvers.
For identification and valuation it would be best if you posted quality photos of the H & R. Instructions for posting photos are at this link.
http://forums.gunbroker.com/topic.asp?TOPIC_ID=2592940 -
Your pictures aint big enough, but it appears to be the "Hammerless" version of their basic Automatic Ejecting revolver. 0 -
Rick,
You are posting thumbnail images, and too much data in your link[:D]. The photo storage sites can get rediculous with all of that stuff.[:(!] Here you go[;)]:
0 -
Thanx, Not to savy on all stuff electronic. Any thoughts? What ammo...is it a shooter? A keeper?
Any and all help is appreciated...to the max!
Rick0 -
there are two seperate models of the H&R Hammerless large frame revolvers. i believe you have a second model. the information below should answer most of your questions about what you have.
H&R HAMMERLESS FIRST MODEL LARGE FRAME TOP BREAK
(BLACK POWDER)
1899-1904
Large Frame Double Action Hammerless Top Break revolver with double top post barrel latch; caliber and cylinder capacity, 38 S&W (5 rounds); finish is nickel or blue (optional); grips are hard rubber with a target logo at the top; standard barrel length is 3 ? inch, with 4, 5 and 6 inch optional; rebounding hammer; automatic cylinder stop. There are no known variations in this model. top of barrel is marked with the same 5 patent dates as the Auto-Ejector Second model 5th Variation, no caliber markings on left side of barrel.
Serial number range; approximately 01* to 45000* (No letter codes): Highest known 43308 (* Estimate)
NO CALIBER MARKINGS ON LEFT SIDE OF BARREL DESIGNED FOR BLACK POWDER CARTRIDGE PRESSURES ONLY
VALUE: 100%=$295 60%=$105 Add 10% premium for blue finish; 20% premium 4", 5" or 6" barrel
H&R HAMMERLESS SECOND MODEL LARGE FRAME TOP BREAK
Smokeless powder
1905-1941
Large Frame Double Action Hammerless Top Break revolver with double top post barrel latch; caliber and cylinder capacity, 38 S&W (5 rounds); finish is nickel or blue (optional); grips are hard rubber with a target logo at the top; standard barrel length is 3 ? inch, with 4, 5 and 6 inch optional; rebounding hammer; automatic cylinder stop. The cylinder was lengthen to take the 32 S&W long cartridge and the catalogs now listed. the calibers are; 6 shot 32 S&W, 32 S&W Long, 32 Colt New Police cartridges. Also offered in 5 shot 38 S&W and 38 Colt New Police. Caliber marked on left side of barrel THIS MODEL WAS DESIGNED FOR SMOKELESS POWDER CARTRIDGE PRESSURES
First variation, 5 patent dates same as First model with caliber marked on left side of barrel, serial number range 45000*-55000* (estimate)-1905-Only
Second Variation, patent dates,5-14 & 8-6-89,4-2-95, 4-7-96, serial number range; 55000*- 100000*(estimate)--1906-1908
Third Variation, patent dates 8-6-1889, 10-8-1895, serial number range; 100000*-120000*(estimate)---1909-1912:
Fourth Variation, no patent dates, state in address not spelled out (MASS.), serial number range; 120000*-160000*(estimate) -1913-1915
Fifth Variation, no patent dates state name in address is spelled out (MASSACHUETTS), serial number range; 160000*-190000* (estimate)-1916-1924
Sixth Variation , new grip frame same as Auto-Ejector, serial number range; unknown
1925-1940
There is some indication production of the hammerless model stopped somewhere in the early 1920's but it was carried in catalogs until 1941 Estimate*
After 1930 listed in Catalogs as: H&R HAMMERLESS No. 50 TOP BREAK .32 S&W LONG 6 shot and H&R HAMMERLESS No. 55 TOP BREAK .38 S&W 5 shot
VALUE: 100%=$325 60%+$110 Add 10% premium for blue finish; 20% premium 4", 5" or 6" barrel
bill0 -
Thank You for all your help. This site, like this H&R are a keeper!
One more follow up if I may...is ammo easy to find?
Again gentlemen, Thanks for your valuable time and effort to resolve what others could not.[:)]
Rick0 -
From the picture this appears to be a five shot???? If so it is the small frame hammerless model and Bill's info for the large frame, does not necessarily apply to the small frame. Please clarify cartridge capacity. Regardless of model, I wouldn't shoot anything other than .32 S&W cartridges through it (i.e. not the .32 S&W LONG). I have a "few" of these in my collection and have fired a couple, just to feel the gun - I wouldn't consider using LONGS in any of mine, NOT even the ones in excellent condition.
.32 S&W Ammo is relatively easy to find, but is costly because not many rounds are made. I've used Winchester Super X and Magtech (Brazilian) - both of which run a bit over 20 bucks per box of 50. Do an online search, you'll find several outlets selling this ammo.
Jim Hauff, H&R Collector0 -
The cartridge capacity is 6. I ordered a box of .32 S&W on line...$ 47.00 for a box of 50!!...and a 4 to 6 week wait to boot!
Thanks for your reply and if you have any additional info it is greatly appreciated.
Rick0 -
6 shot is the LARGE FRAME HAMMERLESS,and the info Bill offered is the best you'll find. Thanks for the clarification. 0
Please sign in to leave a comment.
Comments
10 comments