Stag
I have a couple pieces of stag that I plan on making into pistol grips for a 1911 pistol. I have never done this before and it will be completely trial and error. I have a pretty good game plan but I have no idea how to smooth and polish the stag once I cut it. I am open to any suggestions to help me in this endeavor. I don't know if there is only one way or more than one way but I want to know the right way. Any help will be greatly appreciated. Thanks
0
-
Here is a link to a diy.
http://www.articlesdb.net/Article/Knife-Making-DIY---Crafting-Your-Own-Knife-Handle/256810 -
I have made hundreds... after cut/shape and screw holes drilled...
sand with various grits (usually down to 320-400) and then use some rouge with a buffing wheel (on a grinder) to polish. If you still see scratches sand some more and buff again.
PS. Don"t forget that the grip screw holes have to "step down". You can get a nice little 1911 grip screw hole bit from Brownells for under $20.0 -
quote:Originally posted by CLINTF
I have made hundreds... after cut/shape and screw holes drilled...
sand with various grits (usually down to 320-400) and then use some rouge with a buffing wheel (on a grinder) to polish. If you still see scratches sand some more and buff again.
PS. Don"t forget that the grip screw holes have to "step down". You can get a nice little 1911 grip screw hole bit from Brownells for under $20.
Thanks so much for the info. This should help me make my first set a success instead of a disaster. I really appreciate it! Thanks again!0
Please sign in to leave a comment.
Comments
3 comments