scope base identification
Help needed to ID three Weaver (or weaver style) scope bases. The first is a one piece base, the front half is rounded on the underside to fit on a round barrel, the rear half is flat to extend back over the receiver. This is marked 90 (possibly 06?). (I thought this was for the Browning 22 semiauto but my Weaver chart lists that mount as a 60A.)
5 inches long, 2 holes in front half 2 inches center to center. 2 groves in front half 3/4 inch apart, first is 1/2 inch from front end; 1 groove in back half 11/32 inch from rear end.
Second is approximately 7/16 inches long with 2 holes 5/8 inch center to center with the first centered about 3/16 inch from the right end. One groove about 3/8 inch from the left end. Marked K62.
Third is 1 1/8 inches long, 2 holes 3/4 inch center to center, and 1 groove 5/8 inch from the right end. Marked 51S.
Any help will be appreciated.
5 inches long, 2 holes in front half 2 inches center to center. 2 groves in front half 3/4 inch apart, first is 1/2 inch from front end; 1 groove in back half 11/32 inch from rear end.
Second is approximately 7/16 inches long with 2 holes 5/8 inch center to center with the first centered about 3/16 inch from the right end. One groove about 3/8 inch from the left end. Marked K62.
Third is 1 1/8 inches long, 2 holes 3/4 inch center to center, and 1 groove 5/8 inch from the right end. Marked 51S.
Any help will be appreciated.
0
-
Weaver No 90 is for a Marlin 39A
Weaver No 62 is for a Remington 742 or 760.
I don't know what the K signifies.
Weaver No 51S - can't find.0 -
Thanks Hawk Carse! Anyone got any ideas on the 51S? 0
Please sign in to leave a comment.
Comments
2 comments