Skip to main content
Thank you for your patience as we work through our high volume of requests. If you need assistance with 2FA, please provide the correct phone number in your ticket request so we can assist quicker.
Help Center Community Shop

RCBS UNIFLOW QUESTION

diver1
I have had my uniflow for many years. Last night I developed a problem, only part of the charge would come out of the uniflow. I also noticed that the action seem sticky or draging. I got out the instruction and it talked about cleanning so I took apart the tool and wiped it down. When I put it back together it was worse so can anyone suggest a fix? Thanks for any help. Vince
0

Comments

3 comments

Date Votes
  • MIKE WISKEY
    a lot depends on what type of powder you are using (and what bottom orfice you have). trying to get 80 gns of 4831 into a .22 cal ain't gonna work[:D]
    0
  • zimmden
    Damp powder from humidity maybe. If static electricity is the culprit, wipe down the reservoir, drum and tube with antistatic dryer sheet. Pour some of your powder through a small funnel to see how it flows. Ball powders are best for uniform loads with the least sticking and easiest flow.
    0
  • CHEVELLE427
    mine acts up if i have the small powder end in it there are 2 ,
    one for fine powder and on for course, mine are green see through so i can see if powder comes out,
    the old aluminum ones you could not tell if it stops up


    lg grain powder i feel it cutting them on some throws
    0

Please sign in to leave a comment.

Recent Activity

Didn’t find what you’re looking for?