Skip to main content
Help Center Community Shop

sure I'm beating a dead horse (SKS Problems)

Comments

5 comments

  • nmyers
    Click on the Search button at the top of the page, & enter "Yugo SKS".

    Neal
    0
  • topher5150
    the gas valve is new. i noticed the lever behind the gas valve pops up with every shot
    0
  • Emmett Dunham
    If you are talking about the lever that lockes the gas cylinder into the receiver you may not have the cylinder far enough down into position to completely lock it into place. I would think you could be blocking the gas piston from reaching the rod that pushes the bolt back or loosing gas. If you move the lever up and down with out other part in postion you can see at what point to start the cylinder into postion and when you get it inn right you can tell the lever goes down easy and all the way with out forcing.

    Good, luck

    Emmett
    0
  • buddyb
    Go to surplusrifle.com. Pull up SKS and try the trick with the paper clip.I used stainless wire instead of the paper clip.It fixed mine.
    0
  • lts
    instead of wolf, for slnits (the "ln" represents an h)& giggles, buy a box of remington, winchester, or another brand of 7.62X39 and see if it runs. have yet to have any of my 1/2 doz fail to run. hope you find the problem soon!
    0

Please sign in to leave a comment.

Recent Activity