Load check please. .44 mag with WC820
Bought a bunch of virgin WC820 (lot #47320) awhile back for my m1 carbine (works great) then found out it's a good powder for magnum revolvers so I'm fixing to use it for that too. I've never used a surplus powder except for in my carbine and I was able to get lots of data for it with this powder but for 44 mag the internet seems to vary a lot. Some say use AA9 data others say H110. However, Hornady shows nearly a 4.5 grain difference between the two in this case.
The jug labels say to use H110 data -10% so using a 240 grain Hornady XTP and Hornady's h110 data (-10%) I intend to start with 18.6 grains and work up to 21.7. After the math, the max load should be 22.3 which I won't try.
I'll be using a chrony to help keep things safe.
Anybody have any experience with wc820 in the 44 mag? Do my numbers look safe? Anything else I need to know?
The jug labels say to use H110 data -10% so using a 240 grain Hornady XTP and Hornady's h110 data (-10%) I intend to start with 18.6 grains and work up to 21.7. After the math, the max load should be 22.3 which I won't try.
I'll be using a chrony to help keep things safe.
Anybody have any experience with wc820 in the 44 mag? Do my numbers look safe? Anything else I need to know?
0
-
I'm with you on the different burn rates of WC820 [xx(]
It looks like you are about right with your loads.
Some say to use AA-9 data and others say H-110.
I've seen someone using 23-24grs. of it with hardcast lead bullets.
Chronograph your loads to be sure [;)]0 -
Thanks for the reply dcs.
My math seems to be good. The most consistent velocities and by far the best group (a 4 leaf clover with a fifth 3/4" away [:D]) at 20 yards was the 21.7 grain load. Average velocity was 1272 fps.
With that velocity and the fact that there were no high pressure signs I think I'll try the 22.3 charge and see how that does.0
Please sign in to leave a comment.
Comments
2 comments