Skip to main content
Help Center Community Shop

Magazine interchangability 25/06 & 9.3x62

Comments

5 comments

  • ern98
    Have you requested external dimensions from the seller of the 9.3x62 mag? If the two mags are the same externally then the only real difference may be the gap between the upper/open lips that may be slightly adjustable by mild pressure on them. Basicly the 9.3x62 could be described as a blown out/ackleyatized -06 case and should work, IMO. Unless the mag is prohibatively expensive I say give it a try. Worst case is you put it back up for auction and resell it.
    0
  • nononsense
    skyhigh_seller,

    Maybe if we knew the Make and Model of this rifle, we might be better equipped to provide an answer...

    Best.
    0
  • skyhigh_seller
    Steyr M Luxus.
    Sorry, not trying to be cryptic, I didn't think it mattered.
    I looked at some cartridge drawings and it looked ok, but I know there are more knowledgeable folks here.
    My concern was, thinking the 9.3x62 was also called 9.3x62 Mauser and believing it may be based on the 7x57 not the 30 -06.

    Thanks again. I know that your time is valuable and really appreciate the experts who contribute so generously.
    0
  • dfletcher
    FWIW the 25.06 cycles fine through my CZ 550 in 9.3X62. I'm reloading today's fired 25.06 right now, cycled a few sans powder.
    0
  • nononsense
    skyhigh_seller,

    The 9.3x62 is a case which is slightly shorter than the '06 case but with the same basic dimensions otherwise. The .25-06 should feed through the magazine as long as the feed lips control the direction of the bullet nose in relationship to the ramp. Sometimes a slight tweak can be used to assist with better feeding.

    There is a 9.3x57 and a 9.5x57 cartridge as well.

    Best.
    0

Please sign in to leave a comment.

Recent Activity