A MEC Bottle Question

victorj19

April 18, 2010 18:40

The threads on soda bottles is the same as those on MEC bottles.

Anyone know of any issues using the soda bottles, other than they don't have the filler holes? If not, I'd recommend the thickest ones around.

The soda caps could substitute for the metal caps MEC sells.

Thanks again

Jim

0

• 

  rsnyder55

  April 18, 2010 21:11

  Is it the same type of plastic? I'd be concerned that it might be more prone to developing a static charge or maybe a plastic that attracts the powder so it doesn't flow smoothly. Also, is there enough room between the two bottles to use a larger bottle?
  
  I have two MECs, so I guess I can play with it.

  0
• 

  wpage

  April 19, 2010 10:45

  You could but they are thin...
  If your old ones are getting cloudy. You can clean them up.

  0
• 

  Tailgunner1954

  April 19, 2010 11:05

  Assuming you don't need/want to dump your bottles often, using a 2ltr bottle for the shot jar is a old trick on the progressive MEC's.
  Take your tall "shot" jar and install it over the powder bushing, than screw a 2ltr with the bottom cut out over the shot bushing.
  
  IF you NEED to dump, cap the "powder" jar, and have someone hold a pail under the shot jar so as to catch the shot.
  
  A 2ltr bottle will hold a full 25# of shot
  
  Than the only thing that will slow down a reloading session is the constant refilling of the primer tray.

  0
• 

  victorj19

  April 19, 2010 18:14

  Thanks guys.
  
  I'm not sure I want to use a 2 liter bottle with 25 lbs of shot. Think I'll split a bag into 2 or 3 bottles. I think this would be a good way to store shot and switch shot size on a reloader. Just label the bottle with a marker and cap it.

  0
• 

  JimmyJack

  April 25, 2010 19:35

  I got a bunch of bottles from a local undertaker. The embalming fluid bottle fit perfect.

  0

Please sign in to leave a comment.