Hornady Case Wax question

meunke

April 15, 2010 21:21

I just ran a bunch of .270s through my Lee resizer die using Hornady case was a lube.

Question: I've wiped off the outside nice and clean, but do I need to clean out the inside of the case necks? Can I just put them back in the tumbler if so?

Thanks in advance!

0

• 

  Sig220_Ruger77

  April 15, 2010 22:09

  I always cleaned the inside of the necks myself.
  
  Man am I glad I only have to use case lube for a couple of calibers. [:D]
  
  Jon

  0
• 

  Rocky Raab

  April 16, 2010 04:56

  You can clean wax lubes if you like but it isn't absolutely required. Wax won't harm powder like oils will, and neck tension isn't all that affected either. You can tumble them for a half-hour if it makes you feel better.
  
  BTW, Hornady Unique Case Lube is exactly the same stuff as Mink Oil Boot Treatment. It is wax, lanolin - and not even a drop of mink oil.

  0
• 

  jonk

  April 16, 2010 06:11

  This is the number one reason I use Lee lube. It truly dries and the residue that's left is more like glued on dust than wax or oil.
  
  I've seen misfires from too much wet Hornady lube left in the case. IF you let it really dry, you're fine, but if you size and load it can be an issue (but so can anything then).
  
  When I do use a waxy or oily lube, one way to remove it is toss the cases in a pot of boiling water with a little soap, drain, rinse. It might leave water spots but they'll be oil free.
  
  You CAN throw back in the tumbler, but if you do watch the flash holes- often get plugged and a pain to clean 1 by 1.

  0

Please sign in to leave a comment.