28 g reload question

dkhnter

April 04, 2010 10:13

Rookie reloader here. Purchased a new bottle(1lb) of Hodgdon Universal Clays. Bottom of bottle has a recipe for 28g 3/4, Hull Win.AA, Primer Win 209, Wad Win AA28, powder charge 13.0gr 1200fps. Now, Hodgdon website has the EXACT SAME RECIPE ( exact same components) for 1200fps, but calls for a powder charge of 14.1grains. Just bought a 9000g and I haven't started to reload yet, but I'm already confused as to why the same company has conflicting recipes.

0

• 

  20gabob

  April 04, 2010 12:48

  13 grains has been the standard 28ga loading for years. I have no doubt that the 14.1 gr loading listed in the manual is ok to use but my feeling is it is probably above the 1200 fps velocity. 13 grain load breaks skeet and sporting targets very well. Also may have to do with the fact that the win aa has changed to a built up hull win AA HS over the old compression formed AA which i am still using and will be for as long as i have a supply of them. I don't care much for the HS hulls.

  0
• 

  geeguy

  April 06, 2010 07:34

  Just checked the website, they show 13 grains (no 14 listed for that powder)
  
  13 grains is the most common used.

  0
• 

  dkhnter

  April 06, 2010 16:36

  Thanks for the input. I think I figured out the difference. The old timers at the club also say 13grains. However, I will be reloading WinAAHS hulls and according to the Hodgdon's website the High Strength hulls call for 14.1 grains.

  0

Please sign in to leave a comment.