need some 45-70 info NEW TO 45-70 STUFF
is there any difference in leverloution brass and say winchester brass,
this will be shot out of a NE Handy rifle, loaded some 325 gr in some rem case the other night and i had to seat the bullet just a tad bit deeper as it was hard to close and the bullet was sticking in the rifling.
brass was in range for oal. may try to trim this to the min oal ans see if that will help
this will be shot out of a NE Handy rifle, loaded some 325 gr in some rem case the other night and i had to seat the bullet just a tad bit deeper as it was hard to close and the bullet was sticking in the rifling.
brass was in range for oal. may try to trim this to the min oal ans see if that will help
0
-
nope, brass is brass. just trim to the same length 0 -
Was wondering because someone on another form was offering me some but said they were shorter then normal 45-70.
IM waiting for an answer from them on the oal0 -
The Leverevolution brass is a tad shorter, but still fine to reload with.
I usually keep the Leverevolution brass seperate when I reload, but thats just me.
Jon0 -
Brass is NOT brass. The leverloution brass is about .060 " shorter
than most 45/70 brass. I suggest you sort and measure your different brands and trim and reload accordingly. Bob0
Please sign in to leave a comment.
Comments
4 comments