h&r 22cal 9 shot pistol
i just acquired a h&r 22 cal 9 shot pistol over the internet a couple of days ago i had aquestion about the cylinder i collect these pistols i have about 6 or 7 model 922 and model 929 the cylinder looks like it is for a model 929 because the center part slides in and out to eject the casings all at once not like the model 922 knocking them out one at a time the guy i bought it from said it was made in 1959 i thought all the 922 models did the same function it looks like you can use the cylinder rod to do the function serial #V13380 on bottom of grip cylinder has 2 and 6 stamped on it is the right cylinder or do i have to find the right one ? thanks forgot to add it has blond grips and barrel length is 2 inches
0
-
h&r model 922 9 shot 22 cal
problem with misfires at range almost every other one
when i cock the hammer it feels weak possible weak mainspring? if so would i be able to replace it myself? serial# AL 1812 3and1/2" barrel0 -
H&R used the V letter code in 1959. the all in one ejection method was in use from about 1949 until the 922 was discontinued the first time around. although the two digit number don not match the last two digit of the frame serial number (they should to be original) they are of the right era and should work fine in your model 922.
MODEL 922 SECOND MODEL (FEATURES NEW FRAME)
1953-1961
Solid Frame, Double Action, Pull Pin Cylinder Release, Round & Square Butt, 22 Long Rifle Caliber, 9 shot, Blue Finish, Barrel Lengths 2 ?, 4 & 6 inches
VALUE: 100%=$195 60%=$85
the second model 922's are not as sought after as the first model and are not as safe as the third model with the transfer bar ignition system. they do make good shooters as long as you remember not to carry them fully loaded. keep the hammer down on an empty chamber when carring them.
bill0 -
thanks bill really appreciate all the info you have given me so far rbyerly 0
Please sign in to leave a comment.
Comments
3 comments