Skip to main content
Thank you for your patience as we work through our high volume of requests. If you need assistance with 2FA, please provide the correct phone number in your ticket request so we can assist quicker.
Help Center Community Shop

loading nitro gold 410

shoottatclay
I'm loading a nitro gold 410 hull with a claybuster wad (red) cb 5050-410 hs and 13 grns of lil'gun powder. There is to much room in the shell. I tryed different wad depths it don't help also tryed crimping it harder it don't help. Any body else having the same problem. I'm useing a half once of shot and I don't want to go any heavier. I want stay with that hull.
thx shoottatclay
0

Comments

5 comments

Date Votes
  • longspur rider
    I've loaded Rem STS 410 hulls with the same components other than using H-110 powder & they loaded fine. I've had some 3" hulls of off brand while loading 11\16 oz that I had to put just a little more shot in to fill the hull for crimp. An empty 22 shell makes a good dipper for that.
    0
  • 336marlin
    You might have to go to 296 powder and a Rem. wad (either or both), they take up more space.
    0
  • longspur rider
    I've used the Rem wads & haven't seen much difference.
    0
  • shoottatclay
    quote:Originally posted by shoottatclay
    I'm loading a nitro gold 410 hull with a claybuster wad (red) cb 5050-410 hs and 13 grns of lil'gun powder. There is to much room in the shell. I tryed different wad depths it don't help also tryed crimping it harder it don't help. Any body else having the same problem. I'm useing a half once of shot and I don't want to go any heavier. I want stay with that hull.
    thx shoottatclay

    I've called claybuster he didn't have a answer and he didn't know of anybody that had a problem with that. But he said to me that one guy would use a part of a cheerio. Sounds like to me that somebody did have a problem with that. I tryed it and it does work but I don't want to go that route because it slows things down to much. My 1/2 bar was throwing 211-213 grns. I read on another forum that you can turn your bar over and use a 1/2 drill . I now have raised to around average of 219 grns.still 1/2 oz. I'll shoot them up this weekend and try again. thx for you all input I let you know what happens.
    0
  • shoottatclay
    quote:Originally posted by shoottatclay
    I'm loading a nitro gold 410 hull with a claybuster wad (red) cb 5050-410 hs and 13 grns of lil'gun powder. There is to much room in the shell. I tryed different wad depths it don't help also tryed crimping it harder it don't help. Any body else having the same problem. I'm useing a half once of shot and I don't want to go any heavier. I want stay with that hull.
    thx shoottatclay

    I asked them at the skeet club they said along I'm getting consisted vel.there ok. I loaded some more up after I increased the bar there a little bit better. I think after I get this pd of lil'gun used up. I'll think I try some alliant 410 powder. Think I can go up two bushings with it. Is there any other wad I could try ?
    0

Please sign in to leave a comment.

Recent Activity

Didn’t find what you’re looking for?