Trap 100 in Handgun Reloads
I was pawing through my powder inventory this morning and discovered a can of H. Trap 100. Labeled as "shotgun/handgun" powder. I've checked half a dozen manuals and found no listings for this powder in .357 Mag.
Has anyone used T-100 in .45 ACP, .38 Special, .357 Mag., .44 Special or .44 Mag?
Think I'll check out the Hodgdon site now. Should have done that first, but since I've already typed this much, I'll let it stand.
Thanks,
Has anyone used T-100 in .45 ACP, .38 Special, .357 Mag., .44 Special or .44 Mag?
Think I'll check out the Hodgdon site now. Should have done that first, but since I've already typed this much, I'll let it stand.
Thanks,
0
-
It's probably too fast for any but much-reduced loads in 357. It's also been discontinued long enough that there won't be many (if any) references to it in current data.
In handgun loads, however, you can use RedDot data and compare the velocity you get with what a Start RedDot load would give, and adjust from there.
Added: I just looked it up. Trap 100 is very close to 700X, and right between Red and Green Dot. Follow the advice I gave above, and you'll be fine.0 -
Rocky comes through again!
Thanks!
Rob0 -
I used 700-x for years for reloading shotshells and now use it for 44special and 44 magnum reloads. It seems most loads that I've found were for the larger capacity pistol cartridges. 0 -
From old hodgdon manual 4th printing says for 357 mag 100 grain 8.0 grn 1432 fps 29400 cup 125 gr 7.0 gr 1292 fps 26000 cup 148 gr wc 3.4 gr 842 fps 10600 cup 150 grn 4.0 gr 864 fps 17100
cup 158-160 gr 4.0 gr 864 fps 17100 cup Hope that helps you out. Now you know why i keep the old books.0 -
From Speer #11 manual for 45 ACP;
185gr. TMJ (4.2 - 4.6)
230gr TMJ (4.7 - 5.2)
Not from manual for 45 ACP;
200gr SWC (4.4)
Not from manual for 38 Super;
150gr. SWC (4.0)
Not from manual for 9x23 Win;
150gr. SWC (3.8)0
Please sign in to leave a comment.
Comments
5 comments