Skip to main content
Help Center Community Shop

Need short scope-Help

Comments

4 comments

  • tsr1965
    Hi Donna,

    Look at the Leupold line of Compact scopes. It is a 3-9x33, and should be just what you are looking for. I would mount it in the steel weaver type base, and the matching QD rings. Yes, not an inexpensive venture, but well worth it. While most medium height rings will clear a 40mm bell on a standard rifle, these will be a close call even on the 33mm bell. You might have to go to high rings.

    Best
    0
  • ern98
    Take a look at the Timberline series of Burris scopes. They offer a 3x9x33 that is 10.5" overall length and is very lite. And, there is only 1.5" between the turrets and the front bell of 1" tube. They come with Burris's balistic plex reticule. Best or worst, depending on how you look at it, is that they run for under $150. So they are by no means their high end offering, but they do have with Burris's lifetime warranty. I've got two and like them well enough. Hope this helps.......
    0
  • dfletcher
    quote:Originally posted by ern98
    Take a look at the Timberline series of Burris scopes. They offer a 3x9x33 that is 10.5" overall length and is very lite. And, there is only 1.5" between the turrets and the front bell of 1" tube. They come with Burris's balistic plex reticule. Best or worst, depending on how you look at it, is that they run for under $150. So they are by no means their high end offering, but they do have with Burris's lifetime warranty. I've got two and like them well enough. Hope this helps.......


    My vote exactly. The Timberline line is very small, I have a 4X on a Browning 22 semi, the 3 to 9X on a Ruger Mini and the 4.5 to 14 on an Encore in 6X47. These scopes are about the shortest & smallest around and work well on the smaller guns. Good value too.

    I think the short magnum line from Burris would work well too.
    0
  • idahoducker
    How about one with no bell on the front. Like this.
    http://www.leupold.com/hunting-and-shooting/products/scopes/vx-ii-riflescopes/vx-ii-1-4x20mm/
    Or the Burris version like mentions above.
    http://www.gunbroker.com/Auction/ViewItem.aspx?Item=157873600
    0

Please sign in to leave a comment.

Recent Activity