Skip to main content
Help Center Community Shop

22-250 Sight In

bperdue21
I am wanting to get my 22-250 on paper before i do any load testing and it will all be done in the same day. In the absence of a factory load, I would like to load up about 10 shells to get it on paper and pretty well dialed in. What would be a good load for this?
0

Comments

12 comments

Date Votes
  • Ambrose
    50 gr. Sierra spt. w/37.5 gr. Varget or 60 Hornady spire w/35.5 gr. IMR4064. Both loads shoot well in my TC Icon. I don't mean to offend, but please refer to .22/.250 CARTRIDGES--shells are for shotguns and artillery.
    0
  • bperdue21
    How about rounds? I don't like cartridges.
    0
  • guntech59
    I use 35.4 gr of IMR 4064 with Sierra 55gr HPBTs or Hornady 55gr VMAX. Both shoot 1/2" to 3/4" at 100 yards consistantly in my rifle.

    These loads are 1/2 gr under max so you can certainly tone it down for getting it on paper before load work up.
    0
  • 5mmgunguy
    I am using 35.5 grains of 4064 or 40 grains of H414 behind a Sierra 55 gr PSP. Both are very accurate.
    0
  • guntech59
    Honestly guys......are there ANY inaccurate loads for the 22-250?[:)]

    Everything I have tried has been accurate. Just some are better than others.
    0
  • bperdue21
    Yes there are. I had a 50 gr Vmax load this rifle wouldnt hit a pizza box with. It is a remington 788 and it has been pretty picky. I want to shoot 50 grain, but I fear I am going to have to drop to 45.
    0
  • guntech59
    Sorry....maybe it's the rifle[?]

    Of the five or six I've been around or owned, they all shot well with anything! Lucky maybe.
    0
  • bentley47
    My 22-250 loads were with WW760 - meters better than 4064 and somewhere I read it was, maybe, same as H414. 50 and 55 gr pills shot very well. Anyway, rechambered the last one to 22BR so I could see the bullets hit.
    I once had a Remington Mod. 78 22-250 that wouldn't group under 2". As a last resort, tried mag primers and it tightened them up to 3/4". Never used mag primers before or since, but it sure made a difference on that one.
    0
  • bpost
    quote:Originally posted by bperdue21
    Yes there are. I had a 50 gr Vmax load this rifle wouldnt hit a pizza box with. It is a remington 788 and it has been pretty picky. I want to shoot 50 grain, but I fear I am going to have to drop to 45.


    What do you use to remove the copper fouling?
    0
  • bperdue21
    quote:Originally posted by guntech59
    Sorry....maybe it's the rifle[?]

    Of the five or six I've been around or owned, they all shot well with anything! Lucky maybe.


    Of the three I have owned, they have all been very picky about what they will shoot. I think it is because Remington used a 1:14 twist.
    0
  • bperdue21
    I use Butch's bore shine. I was looking at the Montana Extreme today.
    0
  • JustC
    38.5gr H380, win brass, 52gr SMK seated around .020" off the lands.
    0

Please sign in to leave a comment.

Recent Activity