Skip to main content
Help Center Community Shop

Can someone help ID a few 22 rifle mags? pics!

gearheaddad
I seem to remember the two identical ones were from an old Mossberg bolt action rifle. I'll be listing them on the auction side when I can positively ID them! Any thoughts out there?
Thanks in advance,
Ed
[img][/img]magsandholsters034.jpg
[img][/img]magsandholsters037.jpg
[img][/img]magsandholsters035.jpg
[img][/img]magsandholsters036.jpg
0

Comments

7 comments

Date Votes
  • ogree
    Don't know about the middle one, but the other two look like the 7 round mags for my Mossberg 342 rifle.
    0
  • cnsay
    the middle on looks similar to a mossberg 44us but the factory mag for the 44us had a hole in the bottom for a long screw to make it hold shorts in place.
    0
  • king999
    middle one is mossberg 142 or 152. other 2 are mossberg 44us and variations.
    morty
    0
  • sschrad
    Not sure about the middle one, but it looks Mossbergy. The two outer ones are for the Mossberg 140, 142,144,152,250,350,352 and 353. That piece that is near the narrow side of the magazine is to allow short, long or long rifle to be used in the magazine. It is spring loaded, just lift it up and move to the appopriate position. Farthest out toward the end for LR, in the middle for L and closest for S. The middle one is possibly for the Mossberg 240,340,342 and 344.
    0
  • Ambrose
    Everyone is giving you partially correct information. Here's the real skinny. The 2 outer ones are for the Mossberg 300 series (342, 352, etc.) as ogree says, and they work as sschrad described. However, they will NOT fit the 100 series Mossbergs (140, 142, 144, etc.). The middle one IS for the 100 series. The rectangular hole in the follower is for a clip that snapped on to adapt it for shorts. Neither type that you show here will fit the 44US--that type had a hole for a long screw as cnsy wrote--it also had it's own release whereas the other two types had the release on the rifle. I'm a Mossberg collector and have mags of all three types.
    0
  • Toolman286
    I just sold 2 of the mags on the outside. They are for short, long or long rifle shells. The little shoe lifts up and moves back-n-forth to feed the various length shells. I believe that the center mag is for lr only.
    http://www.gunbroker.com/Auction/ViewItem.aspx?Item=153780386
    0
  • gearheaddad
    Thanks to everyone! I'll be listing them on the auction side, maybe this evening. I just wanted to be sure I described them correctly. I hope somebody needs them!
    Thanks again,
    ED
    0

Please sign in to leave a comment.

Recent Activity