Skip to main content
Help Center Community Shop

I neep help with a recipe

~Mr. Colt .45~
I just bought some Unique powder and 147 grain FMJ bullets and I cant find a recipe for that particular combo. I found a recipe for a 147 grain Speer GDHP but i dont know if that will work or not. If you have any recipes in your reloading manuals then that would be great if you could share them with me.

thanks for your help,
-Joanthan
0

Comments

10 comments

Date Votes
  • jonk
    Caliber?
    0
  • ~Mr. Colt .45~
    quote:Originally posted by jonk
    Caliber?


    Sorry, 9mm
    0
  • dcs shooters
    From 3.7-4.7grs. should work.
    0
  • jonk
    I agree with DCS. I load some 147 FMJ with 3.9 for plinking, so that should be in the right ballpark.
    0
  • ~Mr. Colt .45~
    quote:Originally posted by jonk
    I agree with DCS. I load some 147 FMJ with 3.9 for plinking, so that should be in the right ballpark.


    whats your COL?
    0
  • jonk
    quote:Originally posted by ~Mr. Colt .45~
    quote:Originally posted by jonk
    I agree with DCS. I load some 147 FMJ with 3.9 for plinking, so that should be in the right ballpark.


    whats your COL?
    You know, I honestly don't know? I just kept turning the seating screw in until it would chamber. It's fairly long I know that. I'm shooting this out of a Walther P1. They jsut barely feed through the mag.
    0
  • dcs shooters
    I load them to fit in the mag with a little clearance. 1.136in.
    0
  • ~Mr. Colt .45~
    this is what i loaded,

    50 rounds of 9mm
    147 grain copper plated FMJ
    4.4 Grains of Unique
    OAL 1.140"
    CCI 500 Small pistol primer

    I plan on shooting some of them today to see what happens.
    0
  • matwor
    How'd they do?
    0
  • ~Mr. Colt .45~
    quote:Originally posted by matwor
    How'd they do?


    Great, thanks
    0

Please sign in to leave a comment.

Recent Activity