Skip to main content
Help Center Community Shop

Win. 52B bolt removal

Bill Jordan
I've tried the standard methods; hold the trigger, switch the safety; hidden release.
What's the trick?
0

Comments

6 comments

Date Votes
  • the yooper
    For the 52C it says "to remove bolt, check to be sure chamber is empty. Then close bolt and pull trigger. Push forward on trigger and draw bolt rearward out of receiver." Likely the 52B and C use the same method. Good luck.
    yooper
    0
  • Hangfire
    Just checked mine. sr# 46920B.. Open and retract the bolt.. Pull back fully on trigger, and the bolt can be pulled out.. I think some 52B's were later supplied with a different trigger group.. If pulling the trigger back doesn't work, try this..

    With the firing pin UN-COCKED, and the bolt closed with safety off, push the trigger forward.. Keeping it forward, open and retract/remove the bolt..
    0
  • Bill Jordan
    nope, nope, and nope.
    BTW, it's ser.# 62404 B
    0
  • Hangfire
    Maybe an aftermarket.. I've only had one with a Kenyon trigger.. Here's a discussion..

    http://forums.gunbroker.com/topic.asp?TOPIC_ID=494712
    0
  • Bill Jordan
    That's most likely the answer; the rifle is in such good shape,( Shot by a little old lady only on Sundays at the Club) Literally; I bought it from her Grandson, I'll have to be very careful when I pull the stock off.
    Thanks for the tips.
    Bill
    0
  • RCrosby
    Bill,
    Not to be "too anal", but regarding your quote, I think you'll find that Paul wrote the words. Art just joined in on the harmony.
    A favorite of mine too! Happy New Year!
    Rob
    p.s. "I can gather all the news I need on the weather report."
    0

Please sign in to leave a comment.

Recent Activity

Didn’t find what you’re looking for?