Skip to main content
Help Center Community Shop

10mm Ten Round Mag / Adapter for Colt Delta Elite?

Juggernaut
Have looked all over for 10mm Ten Round Magazines or Adapters for the Colt Delta Elite but to no avail; does any reputable magazine or magazine adapter manufacturer make one perhaps?
Thanks
0

Comments

10 comments

Date Votes
  • fl23in
    you know of these but 10 rds but 9+1 = 10

    http://shopwilsoncombat.com/10mm/products/367/
    0
  • Juggernaut
    quote:Originally posted by fl23in
    you know of these but 10 rds but 9+1 = 10

    http://shopwilsoncombat.com/10mm/products/367/


    Yes I am aware of the '9+1' and have seen the 9 round mags as well and is why I asked about '10 round' magazines or an adapter for a full 10 rounds in the mag not including the +1 in the pipe.
    0
  • fl23in
    quote:Originally posted by Juggernaut
    quote:Originally posted by fl23in
    you know of these but 10 rds but 9+1 = 10

    http://shopwilsoncombat.com/10mm/products/367/


    Yes I am aware of the '9+1' and have seen the 9 round mags as well and is why I asked about '10 round' magazines or an adapter for a full 10 rounds in the mag not including the +1 in the pipe.


    yea i fig that much but was not sure. but i know a few ppl that carry them and have never heard of a 10+1 not sayin it dont exsit but not heard or seen one
    0
  • fl23in
    ok i found this on an old thread the web site dont show them but the thread says many times they do

    Metalform's Extended 10-rd 10mm Mags.

    Phone: 1-800-618-3318

    Websites:

    www.metalformcompany.com



    link of were it says they do
    http://www.bren-ten.com/agtman/id7.html
    0
  • Juggernaut
    Okay thanks, will look into those, thought that there might be as I could have sworn that I heard of or saw them at an earlier time.
    0
  • fl23in
    Yea after reading the 10mm mag link on there site, they are custom order deal
    0
  • Hawk Carse
    There is a 10 round 10mm Tripp Cobramag.
    It protrudes about an inch but there is no other way to increase the capacity of a single stack magazine.
    http://www.trippresearch.com/store/store_1911.html
    0
  • tsr1965
    Well, If 10 rounds(9+1) are not good enough, the only established reliable option, would be the Glock Model 20, or 29, and the EAA Witness. The real 10mm loads are too much for a 1911 platform anyway.

    Best
    0
  • Juggernaut
    quote:Originally posted by fl23in
    Yea after reading the 10mm mag link on there site, they are custom order deal


    Okay.
    0
  • Juggernaut
    quote:Originally posted by Hawk Carse
    There is a 10 round 10mm Tripp Cobramag.
    It protrudes about an inch but there is no other way to increase the capacity of a single stack magazine.
    http://www.trippresearch.com/store/store_1911.html


    Thanks Hawk Carse, that should work for now.
    0

Please sign in to leave a comment.

Recent Activity

Didn’t find what you’re looking for?