Kimber .22 ejection problem
Hope some of the experts here can help.
[?][?]
I have a new Kimber .22 target pistol, (aluminum??) frame.
Using standard velocity ammo a fired case often doesn't eject - not a stovepipe, the case is pulled out of the chamber but stays in the breech & jams the next round.
Is this:(a) A problem that will go away after the action "wears in", (b) pistol needs high velocity ammo (c) manufacturing defect?
Thanks for the help.
10x100
[?][?]
I have a new Kimber .22 target pistol, (aluminum??) frame.
Using standard velocity ammo a fired case often doesn't eject - not a stovepipe, the case is pulled out of the chamber but stays in the breech & jams the next round.
Is this:(a) A problem that will go away after the action "wears in", (b) pistol needs high velocity ammo (c) manufacturing defect?
Thanks for the help.
10x100
0
-
I wouldn't use standard velocity ammo in it untill it is broke in. Try some high velocity ammo. After it is broke in it might function OK with standard velocity.
I only shoot HV stuff in my Kimber conversion 1911.0 -
I've had several "conversion units"; Marvel, Colt and Ceiner. All proved to be very persnickety about what they would and wouldn't digest without difficulty. Your problem may improve with time.
Or it may not.
Good luck,
and Merry Christmas!0 -
The conversion units except the Service model Colt are straight BLOW BACK operation . Thus there is a very small window in RECOIL IMPULSE
that will fully cycle the slide without beating the slide and frame up. Factory guns do not normally come with a spring light enough to work with Standard velocity ammo. Two major things that can be changed is #1 making the slide lighter "not practical" and #2 changing the weight of the recoil spring. "CALL BROWNELL'S tech department..Standard velocity 22 Rimfire will shoot smaller groups in 99% of match pistols and Rifles . Sadly to say your KIMBER may be a very good Plinker however it will never be a Match grade BULLS-EYE pistol, as it does not lock the barrel to the frame like the Marvel, Kart, Day, and a few others . I suggest use High Velocity ammo.
EDITYES I am aware this is a complete unit NOT A CONVERSION UNIThowever Kimber does not tool up to make a unique frame and top half it is a 45acp frame with a conversion unit installed and sold as a pistol.0 -
Most of those conversion units are designed for High Velocity loads. Quite frequently they suggest to use the CCI Mini Mag's in the manual.
Best
EDIT 1
quote:By the way, this is a .22, not a conversion for a .45.
I do understand that, but I am banking, that you could put a 45 upper on that frame. I don't see kimber making two different frames, and two different uppers, just for a 22 and 22 conversion unit.
Best0 -
Thanks for the suggestion - I'll try HV. By the way, this is a .22, not a conversion for a .45. I have the Ciener conversion for my AR (4 years old) and it works very well.
Happy Holidays to all GBers.
10x1000 -
PerryShooter,
If the Kimber is a "plinker", it definitely matches my 67 y.o. plinker eyes. I'm happy to keep in the black at 25 yds. with .38 and .45. 100 yds+ now needs scopes - iron sights are a little too much out of focus. My main interest now is having fun and teaching grandkids to shoot.
Thanks for your comments.
10x1000 -
quote:Originally posted by tsr1965
Most of those conversion units are designed for High Velocity loads. Quite frequently they suggest to use the CCI Mini Mag's in the manual.
Best
EDIT 1
quote:By the way, this is a .22, not a conversion for a .45.
I do understand that, but I am banking, that you could put a 45 upper on that frame. I don't see kimber making two different frames, and two different uppers, just for a 22 and 22 conversion unit.
Best
The Kimber 22 frame is not made for any other upper to work on it. It is dedicated to the upper it comes with.0 -
Page 12 of the manual:
"Use only high quality .22 ammunition. We do
not suggest using sub-soonic ammunition."
I have been told by several owners that theirs will only cycle HV ammo. There is no spring weight listed, and at times, that may not fix the issue. Walther has a similar problem with their SP-22 target series, great gun, but can't use Std. Vel. even with stoning and a spring change.
And no, it is not close to a Bullseye gun, just a great looking plinker.
Best of luck.0
Please sign in to leave a comment.
Comments
8 comments