Reloading ?
I have never reloaded but I am kinda thinking about it. I know nothing about it..............Does it save enough money in the long haul to pay for all the investment you must make up front.........
OR Is it really for fine tuning a load for bench shooting etc...And a kinda break even deal but with a box of accurate ammo......
coonass
We Live in a World of Give And Take, But A Lot Of People Won't Give What it Takes.
OR Is it really for fine tuning a load for bench shooting etc...And a kinda break even deal but with a box of accurate ammo......
coonass
We Live in a World of Give And Take, But A Lot Of People Won't Give What it Takes.
0
-
About how many 45 rounds can you get out of 1 lb of powder. Also what do you recommend for the powder. Thanks David 0 -
Depends on the powder charge. I personally use 5 grains of Red Dot for 230 gr hardball; 7000 grains to a pound equals 1400 rounds. Probably a few more or less due to variation in powder can weights, exact charges, etc.
For cast lead I use 3.5 grains of bullseye. You can do the math from there.
Powder choice is a matter of burn rate, bullet weight, and your intended use (target work, defense, plinking, small game, etc) and whether in a rifle or handgun. I love bullseye and Red Dot, but there are many powders suitable for the .45.0 -
quote:Originally posted by dav1965
About how many 45 rounds can you get out of 1 lb of powder. Also what do you recommend for the powder. Thanks David
I get about 65 rounds a pound for my 338 Lapua .... [:(]
Are you shooting lead for paper target practice or jacketed for some sort of "run & gun" shoot? There are lots of good powders out there for lead - 700X, Win 231, Unique, Blue Dot, Bullseye and so on. All use pretty modest amounts of powder.
Using full bore loads alot of folks switch to Win 296 & H 110 (I'm told they're the same but separately branded) or TightGroup or maybe IMR 4227.
Keep in mind Hodgden and IMR each make a version of 4227, 4198, 4895 and a few others. They're not interchangeable.
I tend to use Win 231 in my 45 ACP guns - primarily because about 5 years ago someone gave me an 8lb container free.0 -
There are 7000 grains to the pound (as mentioned above) so it is simple to do the math for any load you are contemplating. I have used 700-X as a target load for years and like it better than Bullseye as it seems to burn cleaner. I use Unique for full power loads - 6.8 grains with the 230 grain bullet, 7.5 grains with the 200 and find them to be very consistent and accurate. 0 -
This may get more responses on Reloading forum. I like Titegroup for target loads in the .45 ACP 0 -
quote:Originally posted by 62fuelie
There are 7000 grains to the pound (as mentioned above) so it is simple to do the math for any load you are contemplating. I have used 700-X as a target load for years and like it better than Bullseye as it seems to burn cleaner. I use Unique for full power loads - 6.8 grains with the 230 grain bullet, 7.5 grains with the 200 and find them to be very consistent and accurate.
I started using 700X as a skeet load because it was clean and pressures were low.
If you use a dispenser, you may want to start checking your loads when you get below approximately 1/3 of the bottle or you will find your charges may begin to vary.0
Please sign in to leave a comment.
Comments
6 comments