Remington Model 11
I have a Rem. M11 that has a 28" cyl. bore. Is this factory?
It is a 28" solid rib barrel, and is marked CYL underneath
the barrel, right in front of the extension.
It is a 28" solid rib barrel, and is marked CYL underneath
the barrel, right in front of the extension.
0
-
I have a Model 11 Remington marked with "Property U.S.Navy"
that needs a barrel with the CUTTS Compensator. Is their a difference between the Model 11 and the "SPORTSMAN" barrels?
Thanx for help..... I know squat about shotguns and want to acquire a "correct" barrel with Cutts for this WWII veteran
Roger Curl roger_curl@msn.com0 -
I had already looked at the schematic but it doesn't show the small two plugs/pins or whatever they are. If you are familar with the Remington 11, you will notice there is one area on each side of the front of the receiver and the forend that have indentations where a plug/pin goes that aligns the forend and the receiver to make it snug. 0 -
Just found a couple of "forarm retaining pins" for Model 11 12ga. So now I know at least what they are called. Still in market for two to fit my Model 11 16 ga. 0 -
"Still in market for two to fit my Model 11 16 ga.".........much easyer to make, all they are is solid pins .165" dia. by about 1/2" long 0 -
Thanks Mike, I hadn't been able to find out the specs on the pins before you posted. 0 -
I have some. Al 0
Please sign in to leave a comment.
Comments
7 comments