Remington 1100
I recently took my Remington 1100 down for a thourgh cleaning. Which I have done many times in the past. After I put it back together it will not fire. I have taken it down and put it back together again and again to no avail. I tried replacing my trigger housing with another gun. The results the other gun still fires and mine does not. I've checked the firing pin. It is unbroken and looks damaged free. When you go to shoot it. It does not even leave a mark on the cap. So the firing pin is not making contact. I've tried to stick my knife next to the firing pin. That was a stupid move, broke my knife point. So the hammer is striking the firing pin. Or real close to it as far as I can tell. Any ideas?
0
-
Is there a website that CLEARLY explains (preferably with good pictures), how the gas ring(s) are installed on a 1981 vintage 1100 12 ga 2 3/4" and a 2005 vintage 1100 youth 20 ga 2 3/4". The pictures in the factory literature don't really explain it well enough for mr to understand. I am not a shotgunner. thanks 0 -
You might consider contacting Remington customer service, if you don't want to go the barrel code route.
Get their e-mail/phone numbers off their web site.
EDIT #1, Unless it's one of the earliest 1100's or has had the barrel swapped? I make it out to be Nov. 1990.0
Please sign in to leave a comment.
Comments
2 comments