Scoping a Browning .22 auto
What would make a nice proportional quality scope and mount for this rifle?
At one time, Redfield made a nice 3/4" scope of high power rifle quality, but I have not been able to track one down.
Any suggestions will be appreciated.
At one time, Redfield made a nice 3/4" scope of high power rifle quality, but I have not been able to track one down.
Any suggestions will be appreciated.
0
-
I know of no one today making a sub 1" diameter scope, so your choices are a one inch or a vintage scope. Given the vast improvements in optical glass, coatings and construction, I think you would be better served with a modern cheap scope than a good older scope. My choice would be simple 4x. Leupold makes them, though Burris does not. Even Simmons .22 mag is passable for hunting. 0 -
I have a Browning 22 semi auto too. I use the Browning cantilever mount that anchors to the two screw holes just ahead of the receiver. Pretty sure it's still available from Browning. I have a Browning branded 3/4" tube, 4X scope that I think was made by DWS, and older Redfield rings that fit the 3/8" groove. I lucked into it, the gun store that had the Browning also happened to have a Ruger 10/22 with that scope & ring attached - no idea how it happened, I was just looking about while they did the paperwork on the Browning sale and spotted it.
I don't think you'll have much trouble finding the 3/4" rings, but a 3/4" scope and especially the Browning brand will be a challenge. If I were getting a 1" scope I'd go with a 4X Timberline, it's a pretty small scope. Using 1" Burris or Redfield rings for 3/8" groove would work.
Here is info on the Browning website, note the 22 semi mount, it's a bit different than the groove type so you have to buy the Browning rings:
http://www.browning.com/products/catalog/family.asp?webflag_=018J&catalog_=J
There's a listing on another site of a fellow offering the 3/4" Browning branded scope & rings using a 3/8" groove - expensive and the condition looks not very good. Search "Browning scope" and it will pop up, can't post it here. And of course checking the GB sales might turn one up too.0 -
Bill Jordan, In my opinion putting a 1" tube scope on a Browning .22 semi auto will make it look like a bear riding a tricycle. Finding one of Browning scopes with 3/4" tube will be difficult and expensive (you pay for the Browning name) you can more easily find the 3/4" tubed Redfield scopes. The Redfield Sport-STER came in 2.75X and 4X. I seem them often and gun shows and on the internet auctions. Expect to pay $150.00+ for a clean one. While I agree that advances have been made in scopes since the 1970's, one of the 3/4" Redfields will be good quality and will be of appropriate size for the Browning rifle. 0 -
The 3/4" browning scope was made by Redfield. 0 -
Bill Jordan,
Put a Burris Fullfield II 3-9x40 on that and be done with it. Yes it will look large, but that little rifle is very capable of exceedingly good accuracy...capable of plinking bowling pins at 200 yards.
I would scope it for its potential, and be able to use standard sized rings.
Best0 -
quote:Originally posted by Herschel
Bill Jordan, In my opinion putting a 1" tube scope on a Browning .22 semi auto will make it look like a bear riding a tricycle. Finding one of Browning scopes with 3/4" tube will be difficult and expensive (you pay for the Browning name) you can more easily find the 3/4" tubed Redfield scopes. The Redfield Sport-STER came in 2.75X and 4X. I seem them often and gun shows and on the internet auctions. Expect to pay $150.00+ for a clean one. While I agree that advances have been made in scopes since the 1970's, one of the 3/4" Redfields will be good quality and will be of appropriate size for the Browning rifle.
I agree, Herschel.. Bill, that Redfield ( or Browning ) is a perfect match for your .22.. Well worth tracking one down..0 -
I've got a browning 3/4 I'd part with 0 -
I agree with Herschel, dfletcher, and Hangfire in that the Redfield, or Browning, made by Redfield with the Redfield (Browning) Mount is the way to go. Expect to pay more if it's marked with the Browning name.
The Redfields are easy to find, but every now and then their Browning product can be had as well on the more well known auction sites, but you need to check them every few days at a minimum.0 -
Bushnell made 3/4" scopes into the mid 80s , there must be some of those kicking around . I had one back in the 80s on a .22 , it was an adaquate glass for a .22 . 0 -
quote:Originally posted by kimi
I agree with Herschel, dfletcher, and Hangfire in that the Redfield, or Browning, made by Redfield with the Redfield (Browning) Mount is the way to go. Expect to pay more if it's marked with the Browning name.
The Redfields are easy to find, but every now and then their Browning product can be had as well on the more well known auction sites, but you need to check them every few days at a minimum.
In fact, there might even be one on there now .....[;)]
Regarding who makes them, someone else posted on another thread they were made by DWS. I don't know whether that is accurate or if they're made by Redfield, I do know it's well made and has a fine reticle with clear optics. It looks very good on the small 22.0 -
I thank everybody, and agree that the 1" scope is disproportional, and I'll look for a Browning or Redfield. BTW, it's not drilled and tapped, so I'll go with the dovetail setup.
Thanks for the thoughts and ideas.
Bill Jordan0 -
quote:Originally posted by Bill Jordan
I thank everybody, and agree that the 1" scope is disproportional, and I'll look for a Browning or Redfield. BTW, it's not drilled and tapped, so I'll go with the dovetail setup.
Thanks for the thoughts and ideas.
Bill Jordan
Those I have seen are also Redfield products and packaged as such. Good luck.0
Please sign in to leave a comment.
Comments
12 comments