3 inches high at 25 yards

Permanently deleted user

July 16, 2011 13:38

140 grain 7MM08 3 inches high at 25 yards would be approximately where at 100 yards if fired on the horizontal.

Sage 1

0

• 

  tocamoha

  July 16, 2011 14:13

  My book doesn't have 25 yd.increments.The closest it shows to yours is 3.7 inches high at 50 yds. will be 7.6 inches high at 100 yds.

  0
• 

  navc130

  July 16, 2011 14:37

  My experience with 30-06 class rifles, with a low mounted scope: one inch high at 25 yards, was pretty much on center at 100 yards. Obviously, there are too many variables involved to make this a hard-and-fast rule.

  0
• 

  tsr1965

  July 16, 2011 16:44

  There are a lot of variables involved, and sight height is one of the prominant ones. With the center line of your scope 1.5 inches above the center line of the bore, dead on at approximately 25 yards will be dead on at 100. 3 inches is 12 MOA at 25 yards, and 12 MOA at 100 yards is approximately 12 inches. It might not even be on the paper, depending on how big your paper is.
  
  Best

  0
• 

  Hawkshaw

  July 16, 2011 20:31

  Sage1---Go to the web sight of any bullet mfg., and click on their balistic program. Plug in your parameters, and wala. I use Hornadys. HAWKSHAW

  0
• 

  Permanently deleted user

  July 16, 2011 21:54

  Thanks guys.
  
  
  
  Sage1

  0

Please sign in to leave a comment.