97 Winchester

RED4

April 10, 2011 18:16

What is the procedure for taking the end off the magazine tube?
I think someone put a stick in the one I just bought, using it for a plug. I can hear it moving back and forth when I tilt the gun.

0

• 

  RED4

  April 10, 2011 18:16

  can an xpert answer this: are the buttstocks interchangeable between a 16 ga gun and a 12 ga gun? Thanx in advance.

  0
• 

  TRAP55

  April 11, 2011 00:32

  http://stevespages.com/ipb-winchester-1897.html

  0
• 

  azpowerwagon

  April 11, 2011 06:11

  The original plug was made out of wood and does "rattle" around most times. Welcome to the forum.

  0
• 

  RED4

  April 11, 2011 17:55

  quote:Originally posted by Barzillia
  Depress the spring on the sliding locking pin with the blade of a small screwdriver, and push the pin completely out. Then remove the two screws holding the end plug into the magazine tube, and watch as the plug and magazine spring fly across the room. The wooden dowel can then fall out.

  0
• 

  RED4

  April 11, 2011 17:58

  Thanks for the information. I had tried to depress the spring before, but I couldn't get it to release. It finally gave way and I removed the piece of bamboo inside. Thanks again for the help.

  0

Please sign in to leave a comment.