What do I need to duplicate this piece?
It's off my gas log fireplace. It goes from the main control valve to the pilot. It broke ar the short 90*
-
It appears to be 1/ 4 inch aluminum tubing . Just go to a propane sales store that carries heaters and logs . Easily replaced. Carry the old pieces and info on logs.
6 -
I put the caliper on it. It's 1/8 od. Wondered if an auto parts store might have the tube and fitting?
0 -
What make and model of gas stove? You can probably order a brand new piece from them.
3 -
Brass flare nuts tubing ,flare tool or go to fireplace store
0 -
Do not "Bubba" that piece!
6 -
You need a new camera!
6 -
Call your gas company a lot of times they will repair free of charge or just for parts. However soap that thing to make sure it doesn't have a leak when repaired
6 -
You need a new camera!
3 -
one piece 1/4 in Al tube.
The two nuts off the old oneA pipe fitters flaring device.
Several channel locksBoom what do I win
0 -
What? No JB Weld?
0 -
1/8th inch pilot tubing. Are both ends flared?
0 -
If you absolutely can't resist using a thread sealer, Permatex liquid teflon (white) is only good to 140F. There are others rated higher.
0 -
dunbarboyz: 32606859103899/comments/32606897045659
1/8th inch pilot tubing. Are both ends flared?
No. Copper donut that compresses as you tighten.
0 -
jimdeere: 32606859103899/comments/32606924201115
https://forums.gunbroker.com/discussion/comment/11459220#Comment_11459220
No. Copper donut that compresses as you tighten.
Compression ring.
0
Please sign in to leave a comment.
Comments
14 comments