Glenfield/Marlin Nod 60
Thanks for all the response. I put this up for info early this morn and used extraction instead of ejection. Ejection is what the problem is. The cartridge case remains gripped by the extractors after firing or by hand operation of the bolt with a unfired cartridge. The result is that since the case is not ejected; when the bolt attempts to move forward to pick up another cartridge a "jam" occurs. The firing pin should be causing the ejection to occur, but it is not happening. Everything has been completely cleaned and the firing pin length is within.002in. of a number that I had located.
I still would appreciate more input.
Thanks
I still would appreciate more input.
Thanks
0
-
Hangfire, You led me to the problem. You are absolutely correct. The whole leg of the spring was gone. I was not smart enough to spot it. Thanks a million. 0 -
Hope that fixes it.. A new spring will probably work fine without adjustment..
Just a tip.. When posting a question, it's best to keep any follow-up in the same thread.. Use " Reply to topic" to keep everything together.. You have 3 separate posts on this same topic.. Some will subscribe to a question to follow it's progress.. Doesn't work when they're scattered..
http://forums.gunbroker.com/topic.asp?TOPIC_ID=564167
http://forums.gunbroker.com/topic.asp?TOPIC_ID=5641670
Please sign in to leave a comment.
Comments
2 comments