POWer PAC Choke/recoil comp
I have a nice POWer-PAC 3 tube choke/compensator, I lack the barrel
to ventilated housing tube adapter piece.--which I can make--but whatis the gap between the end of the bbl adapter and the inserted choke
tube--(they are all 3 the same length) My guess would be .25" ?,
but there is probably an optimum gap. Oh!!-12GA. Thanx in advance. Jerry
to ventilated housing tube adapter piece.--which I can make--but whatis the gap between the end of the bbl adapter and the inserted choke
tube--(they are all 3 the same length) My guess would be .25" ?,
but there is probably an optimum gap. Oh!!-12GA. Thanx in advance. Jerry
0
-
I hope I understand your question correctly. I have a J C Higgins model 20 shotgun with the issued POW-er-PAC choke device. I have all three choke tubes and, as you stated, they are all the same length. I just got it out and measured the gap between the end of the barrel and the inserted choke tube. It's right at one inch. Hope this helps. Mine's a 12 ga., also. 0 -
Thanks a lot Ambrose, Sure beats my wild a&& guess. 0
Please sign in to leave a comment.
Comments
2 comments