Skip to main content
Help Center Community Shop

Loading Manuals

RobOz
My manuals are getting pretty old, have not bought a new one for about twenty years. Short of buying new manuals, I was thinking about joining loaddata.com. Was wondering if any of you guys use their service and could offer feedback.

Manuals I have are Sierra, Hornady, Hodgdon(old hardback), Speer, and several filler manuals that the loading companies gave out free.
0

Comments

9 comments

Date Votes
  • guntech59
    Much of it is available online now (from the manufacturers).

    Hodgdon, Nosler, Accurate, Ramshot and others have published their data online.
    0
  • bartman45
    I get mine from the powder manufacturers web sites.
    0
  • 243winxb
    Lots of new data online. The older manuals seem to have more load choices. See link. http://www.castpics.net/LoadData/Freebies/default.html
    0
  • Rocky Raab
    The bullet used makes a huge difference in peak pressure - even with bullets of the same weight. The cardinal rule is to use the bullet maker's data as your primary source, the powder maker's data as your secondary source, and an independent laboratory's data as your crosscheck. That would be Lyman. (Lee does no testing whatever, they merely reprint data they find elsewhere.)
    0
  • RobOz
    quote:Originally posted by Rocky Raab
    The bullet used makes a huge difference in peak pressure - even with bullets of the same weight. The cardinal rule is to use the bullet maker's data as your primary source, the powder maker's data as your secondary source, and an independent laboratory's data as your crosscheck. That would be Lyman. (Lee does no testing whatever, they merely reprint data they find elsewhere.)


    I'm right there with you on the bullet make matters.
    0
  • RobOz
    quote:Originally posted by dennisnielsen
    Email me if you need any Sierra info
    I have the newest


    Thanks
    0
  • jonk
    The problem I find is that most bullet and powder manufacturers only have data for the most common cartridges with their newest or most popular powders. For instance, say you have a gun chambered in 7.5 French, or 6.5 Mannlicher-Schoenauer. New manuals usually don't have those, whatever the source. Older manuals often do.

    I'd agree; START with bullet and powder manufacturer's data; however, while commercial load manuals fall short for most oddball cartridges, loaddata.com usually has them, as well as a much greater range for the common rounds.

    I've not subscribed to them, but when they had a free trial I used it to do a lot of look ups and prints; I think it's a very good site.
    0
  • Rocky Raab
    Well, to be fair, how much time would it take to test every known cartridge with numerous bullets? Would you want them to take all that time before they release the new powder - or do what they do now and sell the powder with a limited but growing set of data?
    0
  • RobOz
    I found out that the bullet matters with two 50grain loads for an AR15. One was fine and the other I had to wonder for a minute why my empties had no spent primer, and that was a full grain under max. I should have stared more on the low side of the data, but being young and not so smart at the time, I didn't.
    0

Please sign in to leave a comment.

Recent Activity

Didn’t find what you’re looking for?