How to clear jammed Uberti lever
Uberti yellowboy 38 spl. Entirely my fault. Attempted to substitute a round without full cycle of lever. Now have one loaded round in chamber, another round in line to enter chamber, lever all the way down. Removed mag spring , cartridges in tube and tube plug. Is there any way to clear this jam short of a full disassembly?
0
-
If it's like any other lever, remove the big screw the lever pivots on and pull the lever down and out.
Push the bolt backward and out. That should do it.0 -
A+++++quote:Originally posted by p3skyking
If it's like any other lever, remove the big screw the lever pivots on and pull the lever down and out.
Push the bolt backward and out. That should do it.0 -
Thanks for advice. Removing lever pivot bolt( under spring tension) freed the action and cartridges removed. But unable to re install lever bolt . Found it necessary to relieve tension on leaf springs item 92 & 93 by loosening two bolts just forward of lever bolt.
This allowed lever bolt to drift thru parts and into position, then springs were re tensioned . Thanks again...back to the woods I go.0
Please sign in to leave a comment.
Comments
4 comments